manualshive.com logo in svg

ZyXEL Communications SBG5500-A, User Manual

Share
Download
ZyXEL Communications SBG5500-A User Manual Download Page 251

 Chapter 22 Backup / Restore

SBG5500 Series User’s Guide

251

Restore Configuration 

Restore Configuration allows you to upload a new or previously saved configuration file from your 
computer to your SBG.

Do not turn off the SBG while configuration file upload is in progress.

After the SBG configuration has been restored successfully, the login screen appears. Login again to 
restart the SBG. 

The SBG automatically restarts in this time causing a temporary network disconnect. In some operating 
systems, you may see the following icon on your desktop.

Figure 180   

Network Temporarily Disconnected

If you uploaded the default configuration file you may need to change the IP address of your computer 
to be in the same subnet as that of the default device IP address (192.168.1.1). 

If the upload was not successful, the following screen will appear. Click 

OK

 to go back to the 

Backup / 

Restore

 screen. 

Figure 181   

Configuration Upload Error

Reset to Factory Defaults

Click the 

Reset

 button to clear all user-entered configuration information and return the SBG to its 

factory defaults. The following warning screen appears.

Table 117   Restore Configuration

LABEL

DESCRIPTION

File Path 

Type in the location of the file you want to upload in this field or click 

Choose File

 to find it.

Browse

Click this to find the file you want to upload. Remember that you must decompress compressed 
(.ZIP) files before you can upload them. 

Upload 

Click this to begin the upload process.

Summary of Contents for SBG5500-A



















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands