ZyXEL Communications MAX-306, User Manual, Page: 78 / 405

Chapter 6 The LAN Configuration Screens
User’s Guide
78
6.3 Static DHCP
Click ADVANCED > LAN Configuration > Static DHCP to assign specific IP
addresses to specific computers on the LAN.
Note: This screen has no effect if the DHCP server is not enabled. You can enable it
in ADVANCED > LAN Configuration > DHCP Setup .
Figure 25 ADVANCED > LAN Configuration > Static DHCP
The following table describes the labels in this screen.
Table 20 ADVANCED > LAN Configuration > Static DHCP
LABEL DESCRIPTION
# The number of the item in this list.
MAC Address Enter the MAC address of the computer to which you want the WiMAX
Device to assign the same IP address.
IP Address Enter the IP address you want the WiMAX Device to assign to the
computer.
Apply Click to save your changes.
Reset Click to restore your previously saved settings.