manualshive.com logo in svg

ZyXEL Communications MAX-306, User Manual, Page: 102 / 405

Share
Download
ZyXEL Communications MAX-306 User Manual Download Page 102

Chapter 7 The WAN Configuration Screens

User’s Guide

102

RIP & Multicast Setup
RIP Direction

Select the RIP direction from None, Both, In Only and Out Only.

RIP Version

Select the RIP version from RIP-1, RIP-2B and RIP-2M.

Multicast

IGMP (Internet Group Multicast Protocol) is a network-layer 
protocol used to establish membership in a multicast group. The 
WiMAX Device supports both IGMP version 1 (IGMP-v1) and 
IGMP-v2. Select None to disable it.

Windows Networking (NetBIOS over TCP/IP)
Allow between LAN 
and WAN

Select this check box to forward NetBIOS packets from the LAN to 
the WAN and from the WAN to the LAN. If your firewall is enabled 
with the default policy set to block WAN to LAN traffic, you also 
need to enable the default WAN to LAN firewall rule that forwards 
NetBIOS traffic.

Clear this check box to block all NetBIOS packets going from the 
LAN to the WAN and from the WAN to the LAN.

Allow Trigger Dial

Select this option to allow NetBIOS packets to initiate calls.

Apply

Click to save your changes.

Reset

Click to restore your previously saved settings.

Table 31   

ADVANCED > WAN Configuration > Advanced (continued)

LABEL

DESCRIPTION

Summary of Contents for MAX-306






















































































































































































































































































































































































































Reviews:

No comments