manualshive.com logo in svg

ZyXEL Communications MAX-306, User Manual, Page: 47 / 405

Share
Download
ZyXEL Communications MAX-306 User Manual Download Page 47

User’s Guide

47

C

H A P T E R

   

3  

Internet Connection Wizard

3.1  Overview

This chapter provides information on the Internet Connection Wizard screens. The 
wizard guides you through several steps in which you can configure your most 
basic (and essential) Internet settings.

Note: Screens are presented here in order of appearance as you work through the 

Internet Connection Wizard. To get to any particular screen, you must first 
navigate through the ones that came before it.

3.1.1  Welcome to the ZyXEL Setup Wizard

This is the welcome screen for the ZyXEL Setup Wizard. You can choose to either 
configure your Internet connection or your VoIP connection.

Figure 8   

Select a Mode

Select Internet Connection Wizard to begin.

Summary of Contents for MAX-306






















































































































































































































































































































































































































Reviews:

No comments