ZyXEL Communications MAX-306 User Manual Download Page 133

Page: 133 / 405

Chapter 10 The NAT Configuration Screens

User’s Guide

133

Click ADVANCED > NAT Configuration > ALG to enable and disable SIP (VoIP),
FTP (file transfer), and H.323 (audio-visual) ALG in the WiMAX Device.

Figure 63

ADVANCED > NAT Configuration > ALG

The following table describes the labels in this screen.

Table 50

ADVANCED > NAT Configuration > ALG

LABEL

DESCRIPTION

Enable SIP ALG

Select this to make sure SIP (VoIP) works correctly with port-
forwarding and port-triggering rules.

Enable FTP ALG Select this to make sure FTP (file transfer) works correctly with port-

forwarding and port-triggering rules.

Enable H.323
ALG

Select this to make sure H.323 (audio-visual programs, such as
NetMeeting) works correctly with port-forwarding and port-triggering
rules.

Apply

Click to save your changes.

Cancel

Click to return to the previous screen without saving your changes.

Summary of Contents for MAX-306






















































































































































































































































































































































































































Search results

Summary of Contents for MAX-306

Reviews:

ZyXEL Communications MAX-306, User Manual, Page: 133 / 405

Search results

Summary of Contents for MAX-306

Reviews: