ZyXEL Communications MAX-306, User Manual, Page: 54 / 405

Chapter 3 Internet Connection Wizard
User’s Guide
54
3.1.4 Authentication Settings
This Internet Connection Wizard screen follows the Wireless LAN security setup
screens and allows you to configure your Internet access settings. The settings
here correspond to the ADVANCED > WAN Configuration > Internet
Connection screen (
Section 7.2 on page 93 ).
Figure 13 Internet Connection Wizard > Authentication Settings Screen
The following table describes the labels in this screen.
Table 11 Internet Connection Wizard > Authentication Settings Screen
LABEL DESCRIPTION
Authentication
User Enter the username associated with your Internet access
account. You can enter up to 61 printable ASCII characters.
Password Enter the password associated with your Internet access
account. You can enter up to 47 printable ASCII characters.
Anonymous Identity Enter the anonymous identity provided by your Internet
Service Provider. Anonymous identity (also known as outer
identity) is used with EAP-TTLS encryption. The anonymous
identity is used to route your authentication request to the
correct authentication server, and does not reveal your real
user name. Your real user name and password are encrypted
in the TLS tunnel, and only the anonymous identity can be
seen.
Leave this field blank if your ISP did not give you an
anonymous identity to use.