Home
/
ZyXEL Communications
/
MAX-306
/
User Manual

ZyXEL Communications MAX-306, User Manual, Page: 149 / 405

Share

Page: 149 / 405

ZyXEL Communications MAX-306 User Manual Download Page 149

Chapter 12 The Service Configuration Screens

User’s Guide

149

12.1.3 Before you Begin

• Ensure that you have all of your voice account information on hand. If not,

contact your voice account service provider to find out which settings in this

chapter you should configure in order to use your telephone with the WiMAX

Device.

• Connect your WiMAX Device to the Internet, as described in the Quick Start

Guide. If you have not already done so, then you will not be able to test your

VoIP settings.

12.2 SIP Settings

Click VOICE > Service Configuration > SIP Setting to setup and maintain
your SIP account(s) in the WiMAX Device. Your VoIP or Internet service provider
should provide you with your account information. You can also enable and disable
each SIP account.

Figure 69

VOICE > Service Configuration > SIP Setting

«
...
147
148
149
150
151
...
»

Summary of Contents for MAX-306






















































































































































































































































































































































































































Reviews:

No comments