ZONARE Z.one Ultra SP, Service Manual, Page: 71 / 244

Q00180 Rev B
Page 71 of 244
"Note: Copies are uncontrolled documents - For revision verification see the Master Documentation List"
•
Rebuild Patient Exam Database - Content:
This option allows for specifying the granularity of the exam database rebuild process that is
initiated with the “REBUILD” menu selection below.
NOTE : The exam database content granularity selections (described below) does not have
any effect (is not applicable) for rebuilds where the targeted device (via the pull-
down selection) is an “External” media (i.e. USB memory sticks, CD/DVD, etc)
device.
•
Minimum : Rebuilds the study/exam table ONLY. Additional rebuilding, of the other
tables, will occur later, as each individual study is accessed. (fastest)
•
Complete : Completely rebuilds all exam database tables, including exam/study
table, series table, image/IQ/key image note table. (longer)
•
Patient Exam Database Rebuild “Helper” Files:
These settings allows for specifying how the database “Helper” files will be affected/utilized,
when the “REBUILD” operation is performed.
NOTE : Default is both boxes selected (“checked”):
•
Read : When checked : Tells the system to look for (read) the existence of a
valid single “ HELPER ” file (most current patient/exam information
for entire study) for each exam, and use its content exclusively for the
database rebuild operation (fastest)
When unchecked: The system will scan all files in each exam folder,
looking for the most current data to be used for creation/update of the
“HELPER” file. (longer)
•
Create/Update : When checked : Instructs the system to generate a current
“ HELPER ” file for each exam, during the execution of the “Rebuild”
process. Once completed, subsequent “Rebuilds” should run much
more quickly (as long as the “
READ ” option box is also checked)
When unchecked: The system will not create or make any updates to
existing “HELPER” files, when the “Rebuild” operation is performed.
•
Rebuild Patient Exam Database:
Clicking on this menu item begins the database “Rebuild” process. The “Rebuild” process is
intended to be used in cases where exam access to the patient image ARCHIVE of the internal
exam storage of the scan engine, or other archive media (Cart Hard Drive, remote USB media,
CD/DVD, etc) becomes problematic.