Q00180 Rev B
Page 147 of 244
"Note: Copies are uncontrolled documents - For revision verification see the Master Documentation List"
4.
Press the “BACK”
button to hide the “Details” menu
16.7.4 FTP Remote Access Configuration:
NOTE
:
Normally these three parameters (IP Address, User Name, and Password) will already be configured
properly into the entry boxes, as this is automatically setup at the time of initial software installation on the
Scan Engine. You may therefore bypass this step initially, and only return to the configuration process IF it
is found that the values entered are not allowing FTP access.
1.
On the Diagnostic page, in the “ZONARE SUPPORT” area on the screen, ensure that the
following FTP remote access parameters are configured for the proper serial number of the
Scan Engine in the
Z.ONE.
−
IP Address: (for Zonare FTP Site) ..........................
12.40.200.87
−
User Name: ...............................................................
42SW
or
LOGS
-
42SW
for software upgrade field
-
LOGS
for log reporting field
−
Password:...................................................................
support
2.
Using the
Menu Control
scroll down to backlight the
APPLY
selection, then press the
“SELECT”
button to save the updated settings
Summary of Contents for Z.one Ultra SP
Page 1: ......