Q00180 Rev B
Page 185 of 244
"Note: Copies are uncontrolled documents - For revision verification see the Master Documentation List"
7.
While supporting the display/display arm from swinging to the side, on a soft surface (carpet,
etc.) tilt the Cart forward, until it is horizontal, resting on the two front push handles for support
CAUTION
The Cart may be heavy and care should be taken while tilting forward, use two people if
necessary to avoid injury.
8.
Using a flatblade screwdriver, gently wedge it between the cosmetic sleeve and the wheel mating
surface at the bottom of the SmartCart SP.
9.
Using the screwdriver tip as a wedge, work the screwdriver to extract the wheel from the socket,
and pull it directly away from the SmartCart SP for removal. (Note: the wheel installation is a
‘‘press-fit” ).
10.
For front wheels: Place the locking lever into the full up (wheel locked into straight ahead)
position.
11.
For front wheels: Align the replacement wheel such that the corresponding flat side of the hex
nut on the wheel shaft aligns with the flat edge at the front of the mounting point on the frame of
the SmartCart SP.
12.
Firmly ‘‘press’’ the wheel into place, for re-installation.
Summary of Contents for Z.one Ultra SP
Page 1: ......