Q00180 Rev B
Page 192 of 244
"Note: Copies are uncontrolled documents - For revision verification see the Master Documentation List"
4.
Partially lift the Scanner Deck off the Electronics Enclosure and move to the right side.
5.
Remove the Left CEE Cosmetic panel by the Main Board – loosen the two thumbscrews and
lift straight up to remove.
6.
Disconnect the Scanner Deck wiring from the Main Board – taking note of the connector
locations for reassembly. You may need to cut ty-wraps securing cables to chassis
7.
Set the Scanner Deck aside.
8.
Disconnect the two (2) connectors for the Cart Display Monitor, at the power (J5) and video
signal (J1) connectors on the Main Board.
IMPORTANT NOTE: Be very careful when removing the video cable connector (J1), as the
wires are very fragile!
Looking up from
wheels to front
handle from below.
Deck Screws
Summary of Contents for Z.one Ultra SP
Page 1: ......