Q00180 Rev B
Page 207 of 244
"Note: Copies are uncontrolled documents - For revision verification see the Master Documentation List"
7.
Partially lift the Scanner Deck off the Electronics Enclosure and move to the right side.
8.
Remove the Left CEE Cosmetic panel by the Main Board – loosen the two thumbscrews and
lift straight up to remove.
9.
Disconnect the Scanner Deck wiring from the Main Board – taking note of the connector
locations for reassembly. Cut any tie-wraps that are retaining cables to the chassis.
10.
Set the old Scanner Deck aside, and reverse removal steps for installing replacement Scanner
Deck. Install new tie-wraps securing cables in same locations as were previously removed.
System Verification:
Looking up from
wheels to front
handle from below.
Mount Screws
Summary of Contents for Z.one Ultra SP
Page 1: ......