manualshive.com logo in svg

ZONARE Z.one Ultra SP, Service Manual, Page: 227 / 244

Share
Download
ZONARE Z.one Ultra SP Service Manual Download Page 227

 

Q00180  Rev B 

Page 227 of 244 

"Note: Copies are uncontrolled documents - For revision verification see the Master Documentation List"

 

 

•

 

P/N: 33073-00  

Assy, Gas Spring, Gen II Cart 

Required Tools/Equipment 

•

 

#2 Phillips Screwdriver 

•

 

5mm Allen Hex wrench 

•

 

13mm socket, used on a ratcheting wrench 

•

 

9/32” Nut Driver or wrench

 

Prerequisite Procedures to Be Performed:

 

•

 

Main Power Supply Module - Removal 

Overview of Procedure

 

•

 

Removal of gas spring 

•

 

Re-installation of above items 

•

 

Verification  of system operation 

Main Power Supply Removal: 

•

 

Perform Main Power Supply Module Removal 

 

(NOTE: Refer to Main Power Supply Replacement Procedure in this manual) 

Gas Spring Removal: 

STEPS: 

1.

 

Using the side of the hand – firmly knock the side of the plastic cosmetic sleeve loose. There 
are 3 spring clips that retain it at the top. If it does not come free – gently use the flat blade 
screwdriver to pry the cosmetics loose (use tape on the blade to avoid marring the chassis 
surface). 

 

 

 

Spring Clips 

Summary of Contents for Z.one Ultra SP





















































































































































































































































Reviews:

No comments