Q00180 Rev B
Page 217 of 244
"Note: Copies are uncontrolled documents - For revision verification see the Master Documentation List"
4.
Using the side of the hand – firmly knock the side of the chassis cosmetic sleeve loose. There
are 3 spring clips that retain it at the top. If it does not come free – gently use the flat blade
screwdriver to pry the cosmetics loose (use tape on the blade to avoid marring the chassis
surface).
5.
Slide the outer cosmetic chassis sleeve down and grab the inner sleeve front panel along with
the outer sleeve at the same time from above.
6.
Lift both the Inner and Outer sleeve to gain access to the Scanner Deck retention screws. There
is one spring clip in the center which holds the inner panel down.
Removal of Scan Engine Scanner Deck:
STEPS:
7.
Remove the two (2) Phillips screws on top Scanner Deck.
8.
Remove the two (2) Phillips screws on bottom front CEE cosmetics to the Scanner Deck.
Palette Screws
Spring Clip
Spring Clips
Summary of Contents for Z.one Ultra SP
Page 1: ......