36
000000Ć1150Ć839 IOLMaster 11.02.2004
Result printout
When the measurements are finished you may print the measured
values and a measuring curve of that axial length measurement having
the highest signalĆtoĆnoise ratio, a symbolic representation of the iris,
the pupil and the WTW value. If you want to print the graph of a
different axial length measurement, select it using the cursor (left mouse
button) and press shortcut key <
Ctrl
> + <
P
>.
Note:
For operation of the printer, observe the user's manual provided with
the printer.
To set up an appropriate printer, click on the
Options
menu,
Setup
,
Add Printer
. This will bring up a dialog box for selecting and configuring
the printer. The options available depend on printer hardware and
software.
Note:
Please, use printers recommended by Carl Zeiss Meditec only.
The printout of the measured values may be started from every
measurement mode (ALM, KER, ACD, WTW). The printout will include
all results obtained so far (also those of the other eye if already
available).
It is advisable to start the printout only if all measured values of both eyes
are available.
Note:
While printing, do not take further measurements.
To start the printout:
Ć click the printer button or
Ć <
P
> key.
To start the printout in WTW mode:
Ć Icon or
Ć <
Ctrl
> + <
P
> keys.
IOL calculation
If all measured values have been determined (depending on the
calculation formula) the surgeon can use the IOLMaster to generate IOL
options to match his/her surgical and postoperative requirements.
Fig. 23
Options
menuĄ
Key
Button
P
Operation
