![background image](http://html1.mh-extra.com/html/zeiss/axioskop-2/axioskop-2_manual_3373791085.webp)
OPERATION
Axioskop 2 / Axioskop 2
MOT
Switching on and basic settings
B 40-075 e 06/98
3-19
Overview of function and programming modes:
Function modes
Programming mode
automatic
manual
Start
•
switch on Axioskop 2
MOT
with the on / off switch
(3-1/
27
)
(standard setting after each
switch-on)
•
Keep key "transmitted light
on / off" (3-13/
1
) pressed
and
•
Switch on the
Axioskop 2
MOT
with on /
off switch (3-1/
27
) and wait
until beep is heard after 3 s
•
Keep Set key (3-14/
1
) on
instrument rear pressed for
more than 2 s until double
beep is heard
Settings
−
Light intensity
depending on objective
(nosepiece) and technique
module (reflector turret)
−
Condenser turret position
depending on objective
(nosepiece) and technique
module (reflector turret)
−
Condenser front lens
depending on objective
(nosepiece)
−
Aperture diaphragm
opening
depending on objective
(nosepiece)
−
Transmitted-light
illumination
depending on technique
module
•
Set the Axioskop 2
MOT
in
the same way as the
Axioskop 2
−
Focus positions
depending on objectives
(parfocality)
−
Focusing speeds:
10 steps
End
•
•
Switch off the
Axioskop 2
MOT
with on /
off switch (3-1/
27
)
•
•
Shortly press Set key
(3-14/
1
) on instrument rear
Both function modes and the programming mode are described in detail on the following pages.
Summary of Contents for Axioskop 2
