CARE, MAINTENANCE, TROUBLESHOOTING AND SERVICE
Axioskop 2 / Axioskop 2
MOT
Instrument maintenance
B 40-075 e 06/98
4-5
4.2.3
Check instrument voltage and change it, if required
(1)
Axioskop 2 microscope stand
The power supply in the Axioskop 2 / Axioskop 2
MOT
microscope is suitable for the entire line voltage
range from 100 ... 240 V AC (line frequency: 50 - 60 Hz). Separate setting of the instrument voltage is
therefore not required.
(2)
HBO 100 transformer
Compare set instrument voltage and line voltage
on sliding switch (4-2/
1
) on the rear of the
HBO 100 transformer.
If they are not the same, the instrument voltage
must be changed to the appropriate line voltage
via sliding switch (4-2/
1
) on the instrument rear.
•
Just flip selector (4-2/
1
) upwards or downwards
to set the required instrument voltage of 115 or
230 V.
1
Fig. 4-2
Check voltage of HBO 100
transformer and change it,
if required
Summary of Contents for Axioskop 2
