![background image](http://html1.mh-extra.com/html/zeiss/axioskop-2/axioskop-2_manual_3373791046.webp)
START-UP
Initial start-up
Axioskop 2 / Axioskop 2
MOT
2-14
B 40-075 e 06/98
2.1.12
Connect PC / Laptop to the Axioskop 2
MOT
microscope
Connect the PC to the Axioskop 2
MOT
microscope
via the RS-232 serial interface (2-22/
2
) on the
instrument rear.
Other interfaces on the instrument rear are
designed as SUB-BUS (2-22/
3
) and combined
CAN/SUB-BUS (2-22/
1
) connectors.
2.1.13
Attachment of round cable holder
The round cable holder supplied with the mechanical stages is suitable to hold and store the SW 2
screwdriver on the microscope stand, e.g. behind the nosepiece or at any other freely accessible position
of the stand.
The round cable holder can also be used to attach electrical cables, e.g. of dictating machines. For this
purpose, the round cable holder should be adhered to a suitable position on the microscope.
Fig. 2-22
Axioskop 2
MOT
(rear)
Summary of Contents for Axioskop 2
