INTRODUCTION
Axioskop 2 / Axioskop 2
MOT
Notes on instrument safety
B 40-075 e 06/98
0-9
The Axioskop 2 and Axioskop 2
MOT
microscopes, including original accessories, may only be used for
the microscope techniques described in this manual.
Particular attention must be paid to the following warning notes:
The manufacturer cannot assume any liability for any other applications, possibly also involving
individual modules or single parts. This also applies to all service or repair work which is not
carried out by authorized service personnel. Furthermore, this forfeits all the claims against
warranty.
The power plug must be inserted in a socket featuring a grounding (earth) contact. The
grounding effect must not be made ineffective by an extension cable which does not have a
protective ground wire.
If it is established that the protection measures are no longer effective, the instrument must be
switched off and safeguarded against inadvertent operation. Contact a Zeiss service agency or
Carl Zeiss microscopy service for the repair of the instrument.
The power unit which is integrated in the stand of the microscope permits the use of line
voltages in the range between 100 and 240 V ± 10%, 50 - 60 Hz, without the need for the
voltage to be changed at the instrument.
The power unit for the HBO 103 allows changing between 120 V and 240 V. It is very
important to check that the correct voltage has been set.
Before switching on the instrument, check whether it is suitable for the line voltage present.
Always disconnect the instrument from the line before opening the instrument and before
changing the fuses.
Make sure to use only fuses of the rated power required. The use of makeshift fuses and the
short-circuiting of the fuse holders are not permitted.
When the stand with motorized focusing drive is used, there is a risk of crushing between
stage carrier / condenser carrier and stand base. Therefore, avoid making any adjustments
under the stage carrier when the stage is lowered. For safety reasons, the stage lowering
procedure can be automatically switched off (see page 3-12).
Summary of Contents for Axioskop 2
