START-UP
Attachments and conversions
Axioskop 2 / Axioskop 2
MOT
2-18
B 40-075 e 06/98
2.2.4
Attachment of filter mount
•
Hold filter mount (2-27/
5
) parallel to the
underside of the condenser carrier (2-27/
3
) and
screw holding pin (2-27/
4
) of the filter mount
(2-27/
5
) into the front threaded hole on the left
below the condenser carrier (2-27/
3
) until stop
using the SW 2 angled Allen key 2-27/
6
).
•
Use adjusting lever (2-27/
1
) to screw stop bolt
(2-27/
2
) into the rear threaded hole of the
condenser carrier until stop.
2.2.5
Attachment of SENARMONT DIC
polarizer
•
Hold polarizer (2-28/
6
) parallel to the underside
of the condenser carrier (2-28/
3
) and screw
stop bolt (2-28/
4
) of the polarizer (2-28/
6
) into
the threaded hole on the left below the
condenser carrier (2-28/
3
) until stop using the
angled adjusting lever (2-28/
5
).
•
Use adjusting lever (2-28/
1
) to screw stop bolt
(2-28/
2
) into the rear threaded hole of the
condenser carrier (2-28/
3
) until stop.
Fig. 2-27
Attachment of filter mount
Fig. 2-28
Attachment of SENARMONT DIC
polarizer
Summary of Contents for Axioskop 2
