xi
Maintenance and Inspections
Disposal
General Precautions
CAUTION
• Do not attempt to disassemble the power regeneration converter or the SERVOPACK.
There is a risk of electric shock or injury.
• Do not attempt to change the wiring while power is being supplied.
There is a risk of electric shock or injury.
• After you replace the SERVOPACK, restart operation only after you transfer the parameters from
the old SERVOPACK to the new SERVOPACK.
There is a risk of equipment damage.
CAUTION
• Dispose of the products as general industrial waste.
Observe the following general precautions
to ensure safe application.
• The products shown in illustrations in this manual are sometimes shown without covers or protective guards.
Always replace the covers are protective guards as specified first, and then operate the products according to the
manual.
• The drawings presented in this manual are typical examples and may not match the products that you received.
• If the manual must be ordered due to loss or damage, inform your nearest Yaskawa representative or one of the
offices listed on the back of this manual.
