Yamatake SDC35, User Manual

Page: 37 / 280

(3) Press the [enter] key.
>> The flashing display is stopped, and then the data you have changed is set.
●
Special type
(1) Operate the [display] or [para] key to display desired data to be set.
(How to display the data is explained in "General flow of key operation"
described previously.)
(2) Press any of the [<] , [ ] , and [ ] keys.
>> When the lower display shows a numeric value, the 1st digit starts flashing.
Additionally, when the lower display shows a character string, the entire
character string starts flashing.
When a numeric value is displayed, the value can be increased or decreased
or the flashing digit can be moved using the [<] , [ ] , or [ ] key.
When a character string is displayed, the entire flashing character string can
be changed using the [ ] , or [ ] key.
<
<
<
<
<
<
2-5
Chapter 2. OUTLINE OF FUNCTIONS
pv
sp
pv
sp
(This Figure shows the display
when the 1st digit of "0001" is
flashing.) (This Figure shows the display
when the entire character string
"rUn" is flashing.)
pv
sp
pv
sp
pv
sp
pv
sp
(This Figure shows the display
when setting the PV range type of
the setup setting [C01].) (This Figure shows the display
when setting the RUN/Ready
selection in the parameter setting
[r--r].)