Yamatake SDC35, User Manual

Page: 186 / 280

6-14
Chapter 6. LIST OF DISPLAYS AND SETTING DATA
Display Item
Contents
Initial
value User
level Remarks
Control output 1
range Current output
1: 4 to 20mA
2: 0 to 20mA
Continuous voltage output
1: 1 to 5V
2: 0 to 5V
3: 0 to 10V 1 0 Displayed when control
output 1 of the model is the
current output or continuous
voltage output.
The decimal point position of
the scaling low limit/high limit
becomes 1 digit after the
decimal point when the
control output 1 type is
related to the MV and CT.
When the control output 1
type is related to the PV and
SP, the decimal point
position becomes the same
as that of the PV.
The unit of scaling low
limit/high limit depends on
the output type of control
output 1.
When the output type
relative to MV and MFB; %.
When the ouput type
relative to PV and SP;
same as PV.
When the output type
relative CT;
ampere(current value).
Control output 1 type 0: MV
1: Heat MV (for heat/cool control)
2: Cool MV (for heat/cool control)
3: PV
4: PV before ratio, bias, and filter
5: SP
6: Deviation
7: CT1 current value
8: CT2 current value
9: MFB (including estimated MFB)
10: SP+MV
11: PV+MV 0 0
Control output 1
scaling low limit -1999 to +9999
The decimal point position and unit
may vary depending on control
output 1 type. 0 0