Yamatake SDC35, User Manual

Page: 133 / 280

5-75
Chapter 5. DETAILED DESCRIPTION OF EACH FUNCTION
■
Polarity of output assignment
The polarity of four output assignments (A, B, C, D) used for the output bit
function can be set.
• When the object control output is the relay output or voltage pulse output, and
the operation type of the DO Assignment is set for output bit functions 1 to 4, the
display and setting can be made.
• When the object event output is provided and the operation type of the DO
Assignment is set for output bit functions 1 to 4, the display and setting can be
made.
Handling Precautions
The output relay may be turned ON and OFF repeatedly at a high-
speed depending on the conditions.
To avoid such faulty operation, always strictly observe the following
cautions:
Control output 1: When any of [Output assignment A, B, C, D] (ot1.2
to ot1.5) is set at [49: Control output 1 status], do not set [1: Reverse]
for the same symbol of [Output assignment A, B, C, D Polarity].
Event output 1: When any of [Output assignment A, B, C, D] (Ev1.2
to Ev1.5) is set at [48: Event output 1 status], do not set [1: Reverse]
for the same symbol of [Output assignment A, B, C, D Polarity].
Item (Bank) Display Contents Initial value User level
Control output 1 Polarity A
to D (DO Assignment bank) The digits are called 1st digit, 2nd digit, 3rd
digit, and 4th digit from the right end.
1st digit: Output assignment A Polarity setting
2nd digit:Output assignment B Polarity setting
3rd digit:Output assignment C Polarity setting
4th digit:Output assignment D Polarity setting
0: Direct
1: Reverse
0000 High function
Control output 2 Polarity A
to D (DO Assignment bank) 0000
Event output 1 Polarity A to
D (DO Assignment bank) 0000
Event output 2 Polarity A to
D (DO Assignment bank) 0000
Event output 3 Polarity A to
D (DO Assignment bank) 0000