Yamatake SDC35, User Manual

Page: 175 / 280

6-3
Chapter 6. LIST OF DISPLAYS AND SETTING DATA
6 - 2 List of Parameter Setting Displays
The following shows the meanings of the values stated in the “User Level” column:
0: Basic, Standard, and High function configuration
1: Standard and High function configuration
2: High function configuration
The initial value may vary depending on the model No.
■
Mode bank
Bank selection:
Display Item
Contents
Initial
value User
level Remarks
AUTO/MANUAL AUto: AUTO mode
MAn: MANUAL mode AUTO 0
RUN/READY RUN 0
Displayed when the control
method is other than the
ON/OFF control (CtrL
≠
0).
Whether or not this item is
displayed is selected by the
display mode setup (C73).
rUn: RUN mode
rdy: READY mode Whether or not this item is
displayed is selected by the
display mode setup (C73).
AT stop/start
AT
stop
0
At.oF: AT stop
At.on: AT start
Displayed when the control
method is other than the
ON/OFF control (CtrL
≠
0).
Whether or not this item is
displayed is selected by the
display mode setup (C73).
Release all DO
latches Latch
con-
tinue
0 Lt.on: Latch continue
Lt.oF: Latch release
All DO latches such as
control outputs (relay and
voltage pulse) and event
outputs can be released.
Whether or not this item is
displayed is selected by the
display mode setup (C73).
Communication DI OFF 0 dI.oF: OFF
dI.on: ON Whether or not this item is
displayed is selected by the
display mode setup (C73).
LSP/RSP LSP 0 LSP: LSP mode
rSP: RSP mode
When the model provides the
RSP input, the display is
possible.
Whether or not this item is
displayed is selected by the
display mode setup (C73).