Yamatake SDC35, User Manual

Page: 153 / 280

5-95
Chapter 5. DETAILED DESCRIPTION OF EACH FUNCTION
■
MV display setup
The MV related items to be displayed in the operation display mode can be set.
• When using the SLP-C35 Smart Loader Package, not only the numeric value,
but also the bit input can be used to set [C75: MV display setup].
Handling Precautions
• Even though the heat MV/cool MV display is set at [Enabled], the heat
MV/cool MV is not displayed when [Heat/Cool control: C26] is set at
“0” (Disabled).
• Even though the AT progress display is set at [Enabled], the AT
progress is not displayed while the AT is stopping.
• Even though the MFB display is set at [Enabled], the MFB is not
displayed if the model does not provide the position proportional
output.
Item (Bank) Display Contents Initial value User level
MV display setup
(Setup bank) Whether or not the MV value related items are
displayed in the operation display mode is
determined by the sum of the following
weights:
Bit 0: MV display
Disabled: 0, Enabled: +1
Bit 1: Heat MV/cool MV display
Disabled: 0, Enabled: +2
Bit 2: MFB display
Disabled: 0, Enabled: +4
Bit 3: AT progress display
Disabled: 0, Enabled: +8
15 Standard,
High function
2 3 2 2 2 1 2 0
AT progress display
MFB display
Heat MV/Cool MV display
MV display