Yamaha YZ450F(W), Owner'S Service Manual

Page: 534 / 650

5 - 48
CHAS
HANDLEBAR
11. Install:
• “ENGINE STOP” button
1
• Clutch lever holder
2
• Bolt (clutch lever holder)
3
• Hot starter lever holder
4
• Bolt (hot starter lever holder)
5
• Clamp
6
NOTE:
• The “ENGINE STOP” button, clutch lever
holder and clamp should be installed accord-
ing to the dimensions shown.
• Pass the “ENGINE STOP” button lead in the
middle of the clutch lever holder.
T
R
.
.
4 Nm (0.4 m · kg, 2.9 ft · lb)
T
R
.
.
4 Nm (0.4 m · kg, 2.9 ft · lb)
12. Install:
• Clutch cable
1
• Hot starter cable
2
NOTE:
Apply the lithium soap base grease on the
clutch cable end and hot starter cable end.
13. Adjust:
• Clutch lever free play
Refer to “CLUTCH ADJUSTMENT” sec-
tion in the CHAPTER 3.
• Hot starter lever free play
Refer to “HOT STARTER LEVER
ADJUSTMENT” section in the CHAPTER
3.