C
Daisy Chain Guide
C-14
3
Select the controller where you want to transfer data.
In the "Node Select" window, select the controller where you want to transfer data and click the [OK]
button.
If not all controllers are displayed, click the [Research] button.
"Node Select" window
Select controller (node number 5 in this example).
Click.
24C15-M0-00
n
NOTE
If controllers having the same node number are found when "Research" is performed, a message screen appears
asking whether to execute automatic node number assignment. Clicking the [OK] button on that screen will start
automatic node number assignment. If you do not require automatic node number assignment, click the
[Cancel] button.
If the robot name set in the data to be transferred to the controller does not match the robot name
currently set in the controller, a confirmation message appears asking whether to continue data transfer.
If you want to continue data transfer, click the [Yes] button.
Transfer confirmation message due to robot name mismatch
Click [Yes] to transfer data.
24C16-M0-00
c
CAutIoN
If the above confirmation message appears, check whether the robot name currently used is the same as that to
be displayed as the transfer destination. please note that if they don't have the same name, clicking the [yes]
button may affect the operation.
