Xerox WorkCentre Pro 16FX, User Manual

Page: 33 / 158

Copying 21
Customizing Your Pro 16fx
Programmable Features
The default settings for various machine features may be changed to suit your individual needs.
All of these features remain set until this process is repeated.
Each of the programmable features, along with its program number and options are contained in
the chart below. The procedure to change the default settings follows the chart.
Note: The procedures written in this manual are based on the factory default settings.
Feature Program
Number
Option Number
* Factory Setting
Priority Tray: This feature allows you to set
the default paper tray. At power on or auto
clear, the copier will return to the selected
priority paper tray.
0 0 – Main paper tray *
1 – Alternate paper tray
2 - Second paper tray
Auto Clear Time Out: This feature allows
you to select the time it takes for the copier to
return to the normal copy mode after a copy
cycle is complete.
1 0 – Off
1 – 30 seconds
2 – 60 seconds *
3 – 90 seconds
4 – 120 seconds
Time Out to Power Save: When enabled,
this feature automatically reduces power used
by the copier if the copier has not been used
for the set period of time.
2 0 – Off
1 – 45 seconds
2 – 90 seconds *
3 – 2 minutes
4 – 5 minutes
Time Out to Power Shut-Off: When
enabled, this feature significantly reduces
power used by the copier if the copier has not
been used for the set period of time.
3 0 – 2 minutes
1 – 5 minutes *
2 – 15 minutes
3 – 30 minutes
4 – 60 minutes
5 – 120 minutes
6 – Off
Default Magnification: This feature allows
you to make copies slightly larger or smaller
than the original, or the same size.
4 0 – 100% *
1 – 99%
2 – 101%
Ä