Xerox WorkCentre Pro 16FX User Manual Download Page 17

Page: 17 / 158

Installation

(continued)

6. Secure the paper tray button and the shipping screw in

the locations shown.

•

Turn the paper tray button to secure its storage
position.

Note:

Save the paper tray button and the shipping screw.

They will be needed if the Pro 16fx has to be moved.

7. Load paper into the tray.

•

Refer to the

Loading Paper

section for additional

information.

•

Do not fill above the max line.

8. Push the paper tray firmly back into the Pro 16fx.

Note:

Ensure that the alternate paper tray is lowered.

9. Press the release lever to open the side cover.

10. Remove the Caution tape from the cover.

11. Remove the two red fuser pins by pulling the string

upward one pin at a time.

•

Discard the fuser pins.

Note:

Misfeeds will occur if the fuser pins are not

removed.

CAUTION:

Ensure that the side cover is always open

before opening the front cover.

12. Press the front cover release buttons to open the front

cover.

Summary of Contents for WorkCentre Pro 16FX































































































































































Search results

Summary of Contents for WorkCentre Pro 16FX

Reviews:

Related manuals for WorkCentre Pro 16FX

Brands by name

Popular brands

Xerox WorkCentre Pro 16FX, User Manual

Search results

Summary of Contents for WorkCentre Pro 16FX

Reviews:

Related manuals for WorkCentre Pro 16FX

Brands by name

Popular brands