Xerox WorkCentre Pro 16FX User Manual Download Page 125

Page: 125 / 158

Printer Driver

113

Printer Driver Software Installation

IEEE 1284 Parallel Connection

1. Ensure that the computer and the Pro 16fx are turned

off.

2. Plug the supplied IEEE-1284 cable into the parallel port

on the Pro 16fx.

3. Plug the other end of the IEEE-1284 cable into the

computer.

4. Ensure that the power cord is plugged into the Pro 16fx and then into a grounded outlet.

•

Do not

attach your Pro 16fx to a pass-through port of another device (scanner, CD-ROM

drive, tape drive, Zip

™

drive or external disk).

5.  Turn on the PC.
6.  Start Windows on your computer.
7.  Insert the WorkCentre Pro Series CD-ROM into the CD-ROM Drive.

Note:

For Windows 3.1x, 95, NT 4.0, go to step 8 of the Installation procedure on the next

page for the software version that you are running. For Windows 98, go to the Plug-n-Play
driver installation on the next page.

USB Connection with Windows 98

1. Turn off the computer and the Pro 16fx.

2. Plug the USB cable into the Pro 16fx USB port.

3. Plug the other end of the USB cable into the PC USB

port.

4. Ensure that the power cord is plugged into the Pro 16fx

and then into a grounded outlet.

4. Turn on the Pro 16fx and the PC, and wait for Windows 98 to start.
5. When the Add New Hardware Wizard screen appears, insert the WorkCentre Pro Software

CD-ROM into the CD-ROM drive.

6. Follow the Wizard instructions to install the USB driver.

Note:

Go to the Plug-n-Play driver installation on the next page.

USB
Port

Summary of Contents for WorkCentre Pro 16FX































































































































































Search results

Summary of Contents for WorkCentre Pro 16FX

Reviews:

Related manuals for WorkCentre Pro 16FX

Brands by name

Popular brands

Xerox WorkCentre Pro 16FX, User Manual

Search results

Summary of Contents for WorkCentre Pro 16FX

Reviews:

Related manuals for WorkCentre Pro 16FX

Brands by name

Popular brands