Problem Solving
137
Printer Problem Solving
(continued)
Problem
Probable Cause
Remedy
Character voids
The paper may be too dry.
Try printing with a different batch
of paper.
Background scatter
The paper may be too damp.
Try printing with a different batch
of paper. Do not open packages
of paper until necessary so that
the paper does not absorb too
much moisture from the air.
Printing over uneven surfaces.
If printing onto envelopes, change
your printing layout to avoid
printing over areas that have
overlapping seams on the reverse
side.
Missing characters
The paper may be too damp.
Try printing with a different batch
of paper. Do not open packages
of paper until necessary so that
the paper does not absorb too
much moisture from the air.
Back of printout is
dirty
The transfer roller may be dirty.
Print a few blank pages to clean
the transfer roller.
Incorrect fonts
TrueType fonts may be disabled.
Use the Fonts dialog box in the
Control Panel to enable TrueType
fonts.
Faded graphics
Toner may be low.
Remove the toner cartridge and
shake it gently to evenly distribute
the toner. Then reinstall the toner
cartridge.
Ensure that you have a spare
toner cartridge.
Summary of Contents for WorkCentre Pro 16FX
