Xerox WorkCentre Pro 16FX User Manual Download Page 11

Page: 11 / 158

Preface

vii

Safety Notes

Do not

touch the green photoreceptor. Scratches or smudges that appear on the photoreceptor

will result in poor copy quality and may shorten the service life.

Do not

put your hands into the fuser area, as you may be burned.

Ozone:

This product produces ozone during normal operation. The ozone produced is

dependent on copy volume and is heavier than air. Providing the correct environmental
parameter, as specified in the Xerox installation procedures, ensure that concentration levels
meet safe limits.

If you need additional safety information concerning the Pro 16fx or Xerox supplied materials, you
may call the following toll-free number.

In the United States or Canada:

1 – 800 – 828 – 6571

Summary of Contents for WorkCentre Pro 16FX































































































































































Search results

Summary of Contents for WorkCentre Pro 16FX

Reviews:

Related manuals for WorkCentre Pro 16FX

Brands by name

Popular brands

Xerox WorkCentre Pro 16FX, User Manual

Search results

Summary of Contents for WorkCentre Pro 16FX

Reviews:

Related manuals for WorkCentre Pro 16FX

Brands by name

Popular brands