Xerox WorkCentre Pro 16FX, User Manual

Page: 148 / 158

136 Problem Solving
Printer Problem Solving
(continued)
Problem Probable Cause Remedy
Printing is too slow The computer parallel port may
not be set for high speed
communications. If your computer is equipped with
an ECP parallel port, enable this
mode of operation. Refer to the
Enabling High Speed Printer
Communications
section and
your PC’s user guide.
If using Windows 3.1x, the
background printing item in the
options menu of print manager
may be set incorrectly. Select Background Printing from
the options menu of print manger.
If using Windows 95, the spool
setting may be set incorrectly. Point to the Start Task bar and
then click Settings then Printers.
Click the Xerox WorkCentre
Pro16fx with the right mouse
button. Click Properties and then
spool settings on the details tab.
Select the desired setting from the
available choices.
Computer may not have enough
memory (RAM). Install more RAM in your
computer.
Print Job to large Reduce resolution from 600 dpi to
300 dpi.
Irregular faded
patches of print There is a paper quality problem. Use only paper that meets the
specifications required by the
printer.
Toner may be unevenly
distributed. Remove the toner cartridge and
shake it gently to evenly distribute
the toner. Then reinstall the toner
cartridge.
Black staining There is a paper quality problem. Use only paper that meets the
specifications required by the Pro
16fx.