Xerox WorkCentre Pro 16FX, User Manual

Page: 111 / 158

Fax Special Functions 99
To set a timer operation:
Step Press these keys Comments
1 Menu then 1
Display = “TIMER MODE 1: SET 2: CLEAR”
2
1
Display = “TIMER COMM. #=1”
Note: Up to three different events may be
programmed.
3 Left or right arrow
then
Enter
Select “SEND MODE” or “POLLING MODE”.
4
Example:
0320
Enter the time of the operation (2 digits for the hour
and 2 digits for the minute).
5
* or #
Press “ * ” to select A.M. or “ # ” to select P.M.
6
Example:
2 or Enter
Enter the code for the day of the operation. If the
operation will be performed within 24 hours, just press
Enter .
7
Enter
Display = “ENTER NUMBER”
8
Example: Rapid Key 01
01
Example: Speed Dial 75
75
Enter the fax number of the other machine using one
of the following methods:
•
Press a Rapid key.
•
Enter a Speed Dial number with the number keys.
For a polling operation, go to Step 12.
9
Enter Display = “SET RESOLUTION & CONTRAST THEN
ENTER”
10
Resolution
or
Contrast
If this is a transmission operation, adjust the resolution
and/or contrast if desired. Otherwise, skip this step.
11
Enter
The document will scan automatically if it has already
been set in the SPF.
If the document has not yet been set in the SPF:
a.) place the document in the SPF and press the
Start
Fax key or, b.) place the document on the document
glass and press the Fax From Glass key and follow
the instructions on the LCD.
12 Stop/Exit . . . Press Stop/Exit a number of times until you exit.