126
Problem Solving
Toner Cartridge Replacement
The toner indicator on the copier diagram will light when the toner supply is low. Approximately 10
more copies can be made, but you should have a replacement cartridge in stock. When the J1
status code is displayed, the machine will stop operating until the toner cartridge is replaced.
1
2
Note:
Ensure that the alternate paper tray is lowered.
1. Press the release lever to open the side cover.
2. Press the front cover release buttons to open the front
cover.
3. Press down on the green lever on the front of the old
toner cartridge and pull the cartridge out.
Note:
Help the environment by recycling your used toner
cartridge. Refer to the recycling brochure packed with the
Toner Cartridge for details.
1
2
4. Shake the new toner cartridge horizontally four or five
times and then remove the cover.
•
Save the box and the cover for shipping.
1
2
3
5. Slide the new toner cartridge in until it locks in place.
6. Close the front cover and the side cover.
•
Wait for the ready indicator to light.
Summary of Contents for WorkCentre Pro 16FX
