2-12
Physical setup
Computer Connections
The parallel interface is normally the primary method of sending data from
the host computer to the printer. A high-speed parallel cable (IEEE-1284) is
supplied with the printer.
The RS-232 Serial Port is a secondary method of sending data to the printer,
if a parallel port is not available on the host. Data transmission via the serial
port is much slower and therefore, the parallel port is recommended.
An ethernet connection is also available to provide a high-speed,
bi-directional connection to the printer in networked environments.
Centronics Parallel Port
1
Using the parallel cable supplied with the printer, connect the larger
connector to the parallel port on the printer.
Note:
Only the supplied parallel or high-speed IEEE-1284 parallel cable
should be used to ensure reliable performance. This cable should be
stamped with an “IEEE-1284” marking to indicate that it is a high-speed
parallel cable.
2
Lock the two metal rings on the parallel port into the connector to secure
it to the printer.
3
Connect the opposite end of the parallel cable to the host computer. Be
sure to note which port (LPT1, LPT2, etc.) you have connected the
printer to as this will later be needed for driver or software setup.
Note:
The maximum recommended parallel cable length is 10 feet (3 m).
Summary of Contents for QLS-8100XE
