Xerox QLS-8100XE Operation & Setup Manual Download

Page: 99 / 185

QLS-8100 Xe

4-53

Options Menu

Other options are accessed via the Options menu. The following sections
detail each of the features within this menu category.

Mirror Mode

The QLS-8100 Xe has the ability to print labels in a mirror image format. This
format is useful when printing on transparent media to be applied to a
transparent surface such as glass. This mode mirrors the printed image
horizontally.

To enable or disable mirror mode:

If the printer is in a Ready state, press the PRINT/PAUSE key to pause
the printer.

Press the NEXT or PREVIOUS key until the Options menu is displayed.
Then press the SELECT key.

Press the NEXT or PREVIOUS key until the Mirror Mode menu is
displayed.

Press the + or – key until the desired setting is displayed. Available
options are On or Off.

Press the SELECT key to confirm your choice.

Mirror Mode

Off

Pause: Options

Press SELECT

Summary of Contents for QLS-8100XE


























































































































































































Search results

Summary of Contents for QLS-8100XE

Reviews:

Related manuals for QLS-8100XE

Brands by name

Popular brands

Xerox QLS-8100XE, Operation & Setup Manual

Search results

Summary of Contents for QLS-8100XE

Reviews:

Related manuals for QLS-8100XE

Brands by name

Popular brands