Xerox QLS-8100XE Operation & Setup Manual Download

Page: 92 / 185

4-46

Keypad controls and menus

Press the + or – key to increase or decrease the first number in the
password, then press the SELECT key.

Press the + or – key to increase or decrease the second number in the
password, then press the SELECT key.

Press the + or – key to increase or decrease the third number in the
password, then press the SELECT key.

Press the + or – key to increase or decrease the fourth number in the
password, then press the SELECT key.

Press the SELECT key to lock the front panel using the specified
password.

To unlock the front panel:

If the locked printer is in a Ready state, press the PRINT/PAUSE key to
pause the printer.

Press the NEXT or PREVIOUS key until the System menu is displayed.
Then press the SELECT key.

Press the NEXT or PREVIOUS key until the Front Panel Unlock menu is
displayed.

Front Panel Unlock

0000

Pause: System

Press SELECT

Summary of Contents for QLS-8100XE


























































































































































































Search results

Summary of Contents for QLS-8100XE

Reviews:

Related manuals for QLS-8100XE

Brands by name

Popular brands

Xerox QLS-8100XE, Operation & Setup Manual

Search results

Summary of Contents for QLS-8100XE

Reviews:

Related manuals for QLS-8100XE

Brands by name

Popular brands