8-53
User Guide
Problem Solving
Xerox 700 Digital Color Press
Miscellaneous
System requirements messages (for example, “Order Waste Toner Container,” “Hole Punch Waste Container
•
Full”) may occasionally be blocked by the current UI screen. Close the Job Status screen and open the Machine
Status/Supplies screen to check consumable status.
If the machine stops running mid-job, or does not begin printing after a job is submitted, check the Machine
•
Status/Supplies screen to determine if supplies need to be replaced. The system will stop if sufficient supplies
are not available for a submitted job. If the problem persists, check the Machine Status/Fault screen, select the
fault, and click on the Instructions button.
If the machine stops running mid-job, or does not begin printing after a job is submitted, verify that the
•
applicable paper tray is not empty. The system will stop if sufficient media is not available for a submitted job.
If the problem persists, check the Machine Status/Fault screen, select the fault, and click on the Instructions
button.
The system does not prohibit duplexing coated substrates from the internal trays (Trays 1-3); however, there
•
can be a significant increase in jams or multi-feeds. If large quantities of coated paper are to be run, and if it is
available, the optional OHCF is recommended for paper feeding.
When using heavy coated 11 x 17 in./A3 stock, closing Trays 1-3 with too much force will result in a paper size
•
misread. Open and close the tray gently to allow the paper sensors to correctly identify paper size.
If the adjustment arms are disturbed while re-loading paper in Tray 5 (Bypass), the paper size setting will
•
return to default and cause job to stop until the paper size setting is corrected by the user.
Downloaded From ManualsPrinter.com Manuals