User Guide
4-3
Copy
Xerox 700 Digital Color Press
Document Specification:
Loose leaf
•
5.5 x 8.5 in./A5 to 11 x 17 in./A3
•
16 lb./38 gsm bond to 53 lb./200 gsm bond
•
Up to 250 sheets (based on 24 lb./90 gsm paper)
•
The machine will detect the size of the documents, this means that you can either:
The Document Handler will accept most types of documents. They must be loose leaf,
of normal thickness, between 8.5 x 5.5 in./A5 and 11 x 17 in./A3 in size and in good
condition.
The document input tray can take up to 250 documents at a time. If your document
has more than 250 pages then use the
Combine Original Sets
feature on the Job
Assembly tab. For more information about this feature, go to the topic titled
Job
Assembly
.
As a general rule, load your documents face up in the same orientation as the copy
paper. However, if this is not possible the machine will automatically rotate the image
for you.
Loading documents
Document Handler
Document Handler - Mixed size original
The Document Handler can even feed documents containing different size pages.
However, the top left corners of the original documents must be aligned in the
document handler.
Select
Auto%
Reduce/Enlarge and a specific copy paper size. The image will be modified to fit the selected paper
or
Select a specific Reduce/Enlarge ratio and the
Auto Paper
option. The machine will select the same size of paper.
When you press the
START
button the document will be scanned once only and stored in memory. If the document is
2-sided, the Document Handler will automatically turn it over so that both sides are scanned.
Downloaded From ManualsPrinter.com Manuals
