manualshive.com logo in svg

Xerox Digital Color Press 700, User Manual

Share
Download
Xerox Digital Color Press 700 User Manual Download Page 11

User Guide

Product Overview

1-5

Xerox 700 Digital Color Press

1

3

4

2

5

There are several Consumables included in your machine. The machine will inform you when you need to order a new 
module and when to install it. See the Consumable information below to find out more information.

Drum Cartridges

The Drum Cartridges will provide approximately 30,000 images. The machine display 
and this documentation will enable you to successfully install the new cartridges so 
you do not have to wait for a service call.

Toner Cartridges

The Toner Cartridges can be loaded while the machine is running.  Supplied with the 
toner cartridge is the waste toner container.

Fuser

The fuser will provide approximately 200,000 prints or copies.

Charge Corotron

The machine display and this documentation will enable you to successfully install the 
new Charge Corotron so you do not have to wait for a service call.

Waste Toner Container

The waste toner container will need changing after approximately 30,000 prints or 
copies at 6% area coverage.

Consumables

1.

2.

3.

4.

5.

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for Digital Color Press 700

























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands