manualshive.com logo in svg

Xerox Digital Color Press 700, User Manual

Share
Download
Xerox Digital Color Press 700 User Manual Download Page 137

Problem Solving

User Guide

8-3

Xerox 700 Digital Color Press

6.

5.

Close the Inner Cover.
Close the Top Cover until it clicks into place.
Close the Left Cover until it clicks into place.

If the document cannot be found, raise the Document 
Feeder slowly.
Pull the handle and remove the document. The return the 
handle to its original position and close the Document 
Feeder.

8.

7.

If the document is still not found, lift the Document 
Feeder Tray and remove the document.

Gently return the Document Feeder Tray to its original 
position.

Make sure that the document is not torn, wrinkled or 
folded, and load the document again following the 
instructions displayed on the screen.

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for Digital Color Press 700

























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands