manualshive.com logo in svg

Xerox Digital Color Press 700, User Manual

The Xerox Digital Color Press 700 is a cutting-edge printing solution that delivers vibrant and high-quality color outputs. To help users maximize its capabilities, a free user manual is available for download on our website. Discover all the features and functions of this impressive device and unleash its full potential by downloading the manual from manualshive.com.

Share
Download
background image

10-11

User Guide

Addendum

Xerox 700 Digital Color Press

If a jam occurs, the machine stops printing and a message is displayed on the User Interface (UI). Follow all 
instructions displayed completely and in the sequence shown.

Jam clearance

HCS Entrance Jams (E1, E2, and E3)

Perform the following steps to clear the HCS Entrance jam and resume printing.

HCS Transport Jams (E4, E5, and E6)

Perform the following steps to clear the HCS Transport jam and resume printing.

Open the HCS Front Cover.
Follow the instructions located inside the Front Cover to 
clear the E1, E2, or E3 jam.

Lift the green handle and/or rotate the green knob and 
remove all paper in the entrance area.

Close the green handle.

Close the HCS Front Cover.

If the UI indicates there is a jam in the digital press, 
follow the instructions on the screen to remove any paper 
in the area indicates. Refer to the Jam Clearance section 
in the Problem Solving chapter in this manual.

Follow the instructions displayed on the digital press UI 
to resume printing.

Open the HCS Front Cover.
Follow the instructions located inside the Front Cover to 
clear the E4, E5, or E6 jam.

Lift the green handle and/or rotate the green knob and 
remove all paper in the transport area.

Close the green handle.

Close the HCS Front Cover.

If the UI indicates there is a jam in the digital press, 
follow the instructions on the screen to remove any paper 
in the area indicates. Refer to the Jam Clearance section 
in the Problem Solving chapter in this manual.

Follow the instructions displayed on the digital press UI 
to resume printing.

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for Digital Color Press 700

























































































































































































































Reviews:

No comments

Related manuals for Digital Color Press 700

BadgePass NXT5000 Quick Start Manual preview
NXT5000
Brand: BadgePass Pages: 2
SPRT SP-T6 User Manual preview
SP-T6
Brand: SPRT Pages: 28
Xerox LS 3270 User Manual preview
LS 3270
Brand: Xerox Pages: 55
Star mC-Print3 MCP31LB How To Connect preview
mC-Print3 MCP31LB
Brand: Star Pages: 12
Ricoh MP 2554SP Series Configuration Manual preview
MP 2554SP Series
Brand: Ricoh Pages: 1
Xante ScreenWriter Colour ScreenWriter User Manual preview
ScreenWriter Colour ScreenWriter
Brand: Xante Pages: 446
Oki IP-7900-21 Advanced Operation Manual preview
IP-7900-21
Brand: Oki Pages: 109
Lexmark X5495 Specifications preview
X5495
Brand: Lexmark Pages: 2
Kyocera TASKalfa 5004i Quick Manual preview
TASKalfa 5004i
Brand: Kyocera Pages: 28
FujiFilm 16558126 User Manual preview
16558126
Brand: FujiFilm Pages: 28
Triumph Adler P-C2665 User Manual preview
P-C2665
Brand: Triumph Adler Pages: 202
GeBe GPT-4454 User Manual preview
GPT-4454
Brand: GeBe Pages: 25
Kyocera ECOSYS M3860idn Operation Manual preview
ECOSYS M3860idn
Brand: Kyocera Pages: 483
Epson All in One Printer User Manual preview
All in One Printer
Brand: Epson Pages: 210
Epson aculaser cx37 series User Manual preview
aculaser cx37 series
Brand: Epson Pages: 261
Epson AL-MX200 Series User Manual preview
AL-MX200 Series
Brand: Epson Pages: 410
Epson AcuLaser CX29DNF User Manual preview
AcuLaser CX29DNF
Brand: Epson Pages: 456
Epson AL-MX300 Series Quick Start Manual preview
AL-MX300 Series
Brand: Epson Pages: 2

Brands by name

Popular brands

Load more brands