manualshive.com logo in svg

Xerox Digital Color Press 700, User Manual

Share
Download
Xerox Digital Color Press 700 User Manual Download Page 199

Addendum

Xerox 700 Digital Color Press

10-3

User Guide

In Auto Decurler mode, appropriate decurl settings are selected from the Tools Mode on the UI by:
1. Logging on as Administrator
2. Pressing the Machine Status button.
3. Selecting the Tools tab
4. Selecting System Settings/Common Service Settings/Maintenance
5. Selecting Decurler Setup

The Manual Decurler mode has seven levels of curl correction available at the Interface Module Control Panel:
Three levels of Up-curl correction

Three levels of Down-curl correction, and

•

 A No correction level.

•

The amount of curl correction is changed by selecting a related button. The current selected amount of curl correction 
is displayed by the Control Panel LEDs.

Your system is also designed with several automated presettings for controlling paper curl. When using these settings, 
the machine automatically sets the amount of curl correction at the Decurler.  Therefore, if paper curl is a problem, use 
one of the preset Decurler settings in order to eliminate the problem. 

When the media passes through the decurler, you are notified of the current amount of curl correction by-way-of the 
various LEDs on the Interface Module Control Panel. In addition to Auto Decurler mode, you can manually select curl 
correction from the Interface Module Control Panel.

Auto Decurler

Manual Decurler

Preset Decurler settings

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for Digital Color Press 700

























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands