manualshive.com logo in svg

Xerox Digital Color Press 700, User Manual

Share
Download
Xerox Digital Color Press 700 User Manual Download Page 175

8-41

User Guide

Problem Solving

Xerox 700 Digital Color Press

Cause: Job was divided and printed due to insufficient disk space. 
Remedy: Remove unnecessary data from the hard disk to increase free disk space.

Cause: There is a problem with the document attached to the received mail. 
Remedy: Check the attached document.

Cause: The settings for stapling are canceled and prints the data. 
Remedy: Confirm the staple position and try to print again.

Cause: A malfunction occurred in the machine. 
Remedy: Power-cycle the machine. If the machine is not improved by performing the 
relevant remedy, contact your Xerox Customer Support Center.

Cause: The settings for punching are canceled. 
Remedy: Confirm the punching position and try to print again.

Cause: The settings for folding are canceled. 
Remedy: Confirm the folding settings and try to print again.

Cause: The number of pages exceeds the number of pages that can be stapled. 
Remedy: Decrease the number of pages, or cancel the stapling settings, then try to print 
again.

 

Cause: A malfunction occurred in the machine. 
Remedy: Power-cycle the machine. If the machine is not improved by performing the 
relevant remedy, contact your Xerox Customer Support Center.

Cause/Remedy

Code

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for Digital Color Press 700

























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands