manualshive.com logo in svg

Xerox Digital Color Press 700, User Manual

Share
Download
Xerox Digital Color Press 700 User Manual Download Page 122

User Guide

7-12

Maintenance

Xerox 700 Digital Color Press

Immediately close the Drum Drawer to protect the other 
drums from light.

CAUTION:

 Remember to close the Drum Drawer - Do not 

expose drum cartridges to direct sunlight or strong light 
from indoor fluorescent  lighting. Do not touch or scratch 
the surface of the drum. Doing so may result in 
unsatisfactory printing.

  

Return the R1-R4 handle to the original position and close 
the front door.

Insert the used drum cartridge into an empty container for 
recycling.

That completes the procedure for replacing the Drum 
Cartridges.  

Press both ends of the drum cartridge to place it in a 
horizontal position.

 

10.

11.

12.

13.

Return the Release Handle to its original position.

14.

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for Digital Color Press 700

























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands