8-33
User Guide
Problem Solving
Xerox 700 Digital Color Press
Cause: Tray 6 is empty/out of paper.
Remedy: Add paper to Tray 6.
Cause: Tray 7 is empty/out of paper.
Remedy: Add paper to Tray 7.
Cause: Inserter trays are empty/out of paper.
Remedy: Add paper to the paper trays of the inserter.
Cause: Designated paper size and the size of paper in the tray differs when feeding paper
from the inserter.
Remedy: Reset the paper or cancel the job.
Cause: Finisher staple fault.
Remedy: Check staples and reset correctly.
Cause: Finisher staple feeding is not ready.
Remedy: Check staples and reset correctly.
Cause: Booklet Finisher staple operation is not ready.
Remedy: Check staples and reset correctly.
Cause: The staple cartridge is empty.
Remedy: Check staples. Follow procedures to remove and replace staple cartridge.
Cause: The finisher stacker tray is full.
Remedy: Remove all paper from the stacker tray.
Cause: The finisher top tray is full.
Remedy: Remove all paper from the finisher top tray.
Cause: The finisher stacker tray lower safety warning is on.
Remedy: Remove all paper from the stacker tray and remove any other obstructions.
Cause: The finisher booklet tray is full.
Remedy: Remove all paper from the booklet tray.
Cause: The booklet stapler low staple F signal is on.
Remedy: Remove all paper from the booklet tray.
Cause: The booklet stapler low staple R signal is on.
Remedy: Remove all paper from the booklet tray.
Cause: The envelope folder tray is full.
Remedy: Remove all paper from the tray. Set the output tray for three fold.
Cause: The envelope folder tray is not detected.
Remedy: Check that the folder tray is correctly attached and set.
Cause: The booklet stapler low staple R signal is on.
Remedy: Check the staple cartridge and reset correctly.
Cause/Remedy
Code
Downloaded From ManualsPrinter.com Manuals