manualshive.com logo in svg

Xerox Digital Color Press 700, User Manual

Share
Download
Xerox Digital Color Press 700 User Manual Download Page 206

10-10

User Guide

Xerox 700 Digital Color Press

Addendum

Unloading the Stacker Tray

Use the following procedure to unload the Stacker Tray when it is full, or to retrieve a completed job.

Press the Unload button on the HCS Control Panel. The 
Wait light blinks until the Stacker Tray has reached the 
down position.

Open the front door when the Unload Light illuminates.

Position the securing bar on top of the stacked paper.

Pull the Stacker Cart straight out. Remove the securing 
bar.

Remove the paper from the Stacker Tray.

Push the empty Stacker Cart straight into the HCS.

Position the securing bar on the fixed area inside the 
HCS.

Close the door. The tray will rise to the operate position.

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for Digital Color Press 700

























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands