manualshive.com logo in svg

Xerox Digital Color Press 700, User Manual

Share
Download
Xerox Digital Color Press 700 User Manual Download Page 25

User Guide

3-5

Paper

Xerox 700 Digital Color Press

The High Capacity Feeder can hold paper of weights between 18 
lb./64gsm bond to 80 lb./220 gsm cover, and can hold a maximum of 
2000 sheets of 20lb./75 gsm paper.  Stock can only be loaded LEF.

After stock is loaded into the High Capacity Feeder, a pop-up window 
may appear asking you to change or confirm the type and size of the 
stock. The tray may not be ready for use until you change or confirm 
the size and type of stock.

Your machine also alerts you if the High Capacity Feeder is selected for a print job where the stock selected does not 
match the stock currently loaded.

It also warns you if the Feeder runs out of stock during a job.

The 

optional

 High Capacity Feeder is primarily intended for use as a 

large quantity feeder and accommodates 8.5 x 11 in./A4 Long Edge 
Feed (LEF) stock.

This feature may be enabled/disabled by the System Administrator.

Note

Alternatively, you can change the paper size and paper type by accessing the Paper Tray Attributes screen from the 
System Administrator Menu.

High Capacity Feeder

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for Digital Color Press 700

























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands